DREWspective

I almost forgot to mention…

Over the weekend, I’d finally completed the first chibiMon model!

And it looks like…

Well, on this scale it would be impossible to make it manufacturer quality. But I have one completed, and that’s all that matters!

By far the most difficult part was applying the arms and legs; I knew that getting it wrong would destroy the rest of the work, seeing as it was looking good already. Nevertheless, I had to try.

Having difficulty with sticking the arms on properly, I decided to make a small "lip" of foam at the top of the arm, by cutting away some of the pipe cleaner, straw and surrounding foam. There was then enough space to stick the arm down, and it was a matter of holding it in place as it dried.

Which led to the final, most challenging bit: the legs.

Using the pieces of balsa dowel I’d cut a while ago, I shaped them a little with my trusty pound shop craft knife to make them look more like legs. Then I took one of the small polystyrene eggs I’d bought from the US, and cut them in half using the same knife. To make joining legs and feet, I had to cut the polystyrene some more to form shoes.
Once the pieces were glued together, I gave them a coat of primer just to be sure. In most cases only the feet (or shoes) would be painted, while the legs would be turned into trousers or pants using foam. In this case, the feet were painted in black (or just a very dark grey).

Once that had dried, the legs were covered in blue foam. The heating tool proved useful once again in helping to shape and stretch the foam, creating a desired, slight overlap over the feet. The join between the legs had to be preserved using a toothpick, as the glue dried.

By far the most awkward bit was attaching the legs to the rest of the figure; this was where a band saw, or even setting up my jigsaw (or better still, a hacksaw and mitre), would have come in handy. To my horror, the tops of the legs were not straight, and no amount of cutting with the craft knife would solve it.

The end result was unfortunately a wonky -looking model, but even so it is able to stand on its own.

Excellent!

Now 17 more to go…

So the shapes have arrived, and we’ve hit a snag as we’ve found out the shapes that were ordered were too small for the existing head pieces.

It also turns out that most of the ordered pieces, which were bought from a shop in the US, could have been ordered over here in the UK! However, these shops had kept themselves very well hidden.
For future reference, a search for pin craft in your favourite search engine should take you to the right place to buy polystyrene shapes. In most cases, you’ll be able to get the parts you’re after.

Where are we up to now? I’ll show you:

I initially made a start on the first three models, painting the head separately from the bodies.

Everything went well, until I had trouble getting the right flesh tone for the white characters. I have a formula for creating a good flesh tone, but unfortunately I didn’t have the right colour paints. In the meantime, I stuck the heads to the bodies.

A trip yesterday to both the London Graphic Centre in Covent Garden, and Cass Art in Leicester Square, turned up six more tubes of acrylic paint and some white gesso primer. As the head shapes were low density (LD) polystyrene, I applied a couple of coats of primer to them, as well as the top part of the body.

You might or might not be able to see it, but there are five different skin colours in the photo: brown, white, olive, pale white and a kind of orange tan white.

Next question is: what is the next step?

I might have solved the problem of how to make the legs: along with the paints, I bought some 12mm balsa wood dowel, which might or might not work as is. I decided on balsa wood as nowhere seems to sell ordinary polystyrene rods, and a request to a company that makes custom polystyrene shapes turned out to be fruitless.

I still have next to no clue as to how to make the arms. Right now I’m toying with the idea of using art straws as a base, and it’s a matter of getting hold of some. Due to my job, I can’t get to any art and crafts store during the week whatsoever.

For the new year, one of my big craft projects is to make models of my chibiMon characters.

chibiMon was a concept I began devising back in 2003, and initially it was going to be a cartoon series. Unfortunately my passion for animation was killed by the university I went to, and for other reasons it became much more than just a project.

You can find some examples of chibiMon at this link, which goes to my DeviantArt gallery.

I got the idea of making models of the chibiMon characters when I was shopping for scrapbooking and craft materials; I came across some polystyrene balls, and instantly I thought they looked like chibiMon heads.

In this photo I’ve started to construct a chibiMon using a polystyrene ball and some paper made into a cone. I had to poke around on Google for a reminder of cone mathematics, and it was a little hard to follow after all these years, but eventually I got the hang of it.

The height of the frustrum (cone segment) and the diameter of the base were known already, so all that was needed to make a body template was the top radius. A little experimenting had to be done to find the right radius measurement.

But then I noticed that the body was slightly too tall, so I reduced the height of the cone by about a centimetre. I finally managed to get the perfect dimensions.

I had looked around for objects and materials I could use to construct the body. There are some polystyrene mini-bells you can only get online: these might be perfect for the model, but there is no information on the diameters of the top and bottom. I am still stuck on how to make the legs; I’ll have to tackle that one later.