DREWspective

I almost forgot to mention…

Over the weekend, I’d finally completed the first chibiMon model!

And it looks like…

Well, on this scale it would be impossible to make it manufacturer quality. But I have one completed, and that’s all that matters!

By far the most difficult part was applying the arms and legs; I knew that getting it wrong would destroy the rest of the work, seeing as it was looking good already. Nevertheless, I had to try.

Having difficulty with sticking the arms on properly, I decided to make a small "lip" of foam at the top of the arm, by cutting away some of the pipe cleaner, straw and surrounding foam. There was then enough space to stick the arm down, and it was a matter of holding it in place as it dried.

Which led to the final, most challenging bit: the legs.

Using the pieces of balsa dowel I’d cut a while ago, I shaped them a little with my trusty pound shop craft knife to make them look more like legs. Then I took one of the small polystyrene eggs I’d bought from the US, and cut them in half using the same knife. To make joining legs and feet, I had to cut the polystyrene some more to form shoes.
Once the pieces were glued together, I gave them a coat of primer just to be sure. In most cases only the feet (or shoes) would be painted, while the legs would be turned into trousers or pants using foam. In this case, the feet were painted in black (or just a very dark grey).

Once that had dried, the legs were covered in blue foam. The heating tool proved useful once again in helping to shape and stretch the foam, creating a desired, slight overlap over the feet. The join between the legs had to be preserved using a toothpick, as the glue dried.

By far the most awkward bit was attaching the legs to the rest of the figure; this was where a band saw, or even setting up my jigsaw (or better still, a hacksaw and mitre), would have come in handy. To my horror, the tops of the legs were not straight, and no amount of cutting with the craft knife would solve it.

The end result was unfortunately a wonky -looking model, but even so it is able to stand on its own.

Excellent!

Now 17 more to go…